PRODUCTS
Your location:Products >> Control valve >> Electronic electric sleeve regulating valve
Electronic electric sleeve regulating valve
Model: ZDLM
Nominal diameter: DN25 ~ 300mm
Nominal pressure: ANSI 125 ~ 600; JIS 10 ~ 40K; PN1.6 ~ 6.4MPa
Main material: Cast steel ZG230-450, cast stainless steel ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, SCS16) titanium
Design criteria: GB / T17213
Inspection standards: GB / T4213
Flange standard: JIS B220, JB / T79, ANSI B16.5-1981, GB / T9113, HG20594-97, HG20618-97 etc.
Product details

ZDLP electric single-seat electric control valve, the PS series and 3610 series of straight-stroke electric actuator and low-flow resistance through the single-seat valve (also available with other brands straight stroke actuator). Electric actuator for the electronic integration structure, with a servo amplifier, the input control signal (4-20mADC or 1-5VDC) and the power to control the valve opening, to the pressure, flow, level, temperature and other parameters adjust. With sensitive action, simple connection, large flow, small size, high regulation accuracy. Control accuracy and performance than the DKZ type has significantly improved.

Single-seat valve for leakage on the strict requirements of the valve before and after the low pressure and a certain viscosity of the occasion. Widely used in electric power, metallurgy, chemical industry, petroleum, environmental protection, light industry, equipment and other industries.
 

1, the main technical parameters 

model Rated output force N Speed mm / s Technical Parameters
PSL 361L PSL 361L PSL 361L PSL 361L
201 361LSA-08 
361LXA-08
1000 800 
800
0.25 4.2 
4.2
Power: AC220V 50Hz 
Input signal: DC4-20mA 
DC1-5V 
(signal line shielded cable)  
Output signal: DC4 ~ 20mA 
Protection class: IP67 
With hand wheel 
Power: AC220V 50Hz 
Input signal: DC4-20mA 
DC1-5V 
(signal line shielded cable)  
Output signal: DC4 ~ 20mA 
Protection class: quite IP55 
Flameproof mark: ExdⅡBT4 
with handle
202 361LSA-20 
361LXA-20
2000 2000 
2000
0.50 2.1 
2.1
204 361LSB-30 
361LXB-30
4500 3000 
3000
0.50 3.5 
3.5
208 361LSB-50 
361LXB-50
8000 5000 
5000
1.00 1.7 
1.7
312 361LSC-65 12000 6500 0.60 2.8
325 361LSC-99 25000 10000 1.0 2.0

 

2, performance indicators 

project Index value
Basic error% With 361L 2.0; with PSL 0.1
Backlash% 2.5
dead zone% 1.0
Always point deviation% Electricity Start point ± 2.5
end ± 2.5
Power off Start point ± 2.5
end ± 2.5
Adjustable range 30: 1
Rated travel deviation% 2.5
Allowable discharge L / H Single seal in line with JB / T7387-94 Class IV less than the rated capacity of the valve × 10-4 
double seal with JB / T7387-94 Ⅲ level less than the rated capacity of the valve × 10-3

 

3, to allow pressure 

Nominal diameter (mm) 25 40 50 65 80 100 150 200 250 300
Seat diameter (mm) 25 32 40 50 65 80 100 125 150 200 250 300
Execution agency Allowable pressure difference △ P (MPa)
With PSL PSL202 6.4 
3.14
6.4 
1.92
6.4 
1.23
5.1 
0.78
PSL204 4.31 2.76 1.76 6.4 
1.04
6.4 
0.69
5.62 
0.44
PSL208 1.86 1.23 0.78 6.4 
0.50
5.31 
0.35
3.97 
0.20
PSL320 1.26
0.87 0.49 6.4 
0.32
4.14 
0.22
With 361L 361LSA-20 6.4 
3.14
6.4 
1.92
6.4 
1.23
6.4 
0.78
361LSB-50 6.4 
1.16
6.4 
0.76
6.25 
0.49
361LSC-65 6.4 
0.64
4.32 
0.41
3.23 
0.28
361LSC-99 0.63 0.44 0.25 3.31 
0.16
0.27 
0.11

Note: 
 1, the same grid on the row for the double-sealed type allows the pressure difference, the lower row is a single sealed type to allow pressure. 
 2, the actual configuration needs to be based on specific process parameters. If the pressure difference is not clear or the maximum working pressure is out of the range, please contact us and take appropriate measures to solve it.


4, Dimensions

Nominal diameter (mm) 25 40 50 65 80 100 150 200 250 300
L (mm) PN1.6MPa 184 222 254 276 298 352 451 600 720 820
PN4.0MPa 197 235 267 292 317 368 473 600 760 850
PN6.4MPa 210 251 286 311 337 394 508 650 800 870
H1 (mm) 72 87 92 105 110 127 174 209 300 350
With PSL H (mm) normal type 750 765 767 845 857 875 1025 1045 1252 1545
Heat sink type 900 930 937 1025 1042 1085 1285 1305 1805 1825
D (mm) 176 225
Weight (KG) 23.5 33.5 40.5 69 84 112 189 262 415 635
With 361L H (mm) normal type 513 650 652 770 782 800 1080 1125 1345 1365
Heat sink type 663 815 822 950 967 1010 1340 1385 1625 1645
D (mm) 225 310
Weight (KG) 31 49 56 84 99 127 242 315 463 683